ESC/P-K Emulation
461
A
p
pe
nd
ix
15
Extended Settings
Setting Item
Item
Number
Value
Paper position
20
Sets the paper position.
[0] (Default)
: Without cut sheet feeder (left)
[1]
: With cut sheet feeder (center)
Note
•
When a continuous form paper is selected for [Document Size],
[Paper Position] cannot be set.
Output quantity
8
Sets the number of copies to be printed.
[1 to 250] (Default: 1): 1-250 copies
Important •
When the output quantity is specified by a client, the copies of that set
of number will be printed. After printing, the number set on the
control panel will be changed to that number. However, the number
of copies specified from NetWare or lpd port will not change the
number set on the control panel.
Reduce/enlarge
54
(Reduce/
enlarge mode)
Sets the print magnification.
[0] (Default)
: Preset %
[1]
: Variable %
[2]
: Fit to Cut Sheet
[Preset %] is a magnification calculated automatically based on
[
Document
Size] and [Paper Size], and reduces/enlarges the printable
area of the original to fit to the printable area of the output paper.
Therefore, if the size of the original and that of the output paper are the
same, the magnification will be 100%. Also, if [2 Up] is selected, the
original will be reduced to the size where two pages fit into one sheet of
paper.
[Variable %] is a magnification set in [Variable %] under [Reduce/
Enlarge]. A reference point for scaling (reducing/enlarging) is the upper
left corner of the printable area. This reference point applies to all text,
images, and graphics.
[Fit to Cut Sheet] prints the entire cut sheet area to the printable area of
the output paper. It is a magnification calculated automatically based on
[
Document
Size] and [Paper Size], and reduces/enlarges the whole
original (including the area outside of the printable area) to fit to the
printable area of the output paper.
17
(Variable %/
vertical
magnification)
Sets the magnification for the vertical or horizontal direction.
[45 to 210] (Default:100): 45-210%
Note
•
When a continuous form paper is selected for [Document Size], both
[Preset %] and [Fit to Cut Sheet] produce the same print result.
18
(Variable %/
horizontal
magnification)
2 Up mode
21
Sets whether to print in 2 Up or page by page. 2 Up is a feature that
prints two pages onto one sheet of paper. Depending on the paper
orientation, the two pages are printed side by side, or one above the
other.
[0] (Default)
: Off
[1]
: Forward
[2]
: Reverse
Important •
When [Landscape] is selected for [Document Size], [Forward] or
[Reverse] produce the same print result.
Содержание DocuCentre III C3100
