Initial Setup
18
ColorQube 8700/8900 Color Multifunction Printer
System Administrator Guide
Note:
If the system administrator has restricted printing of the Configuration Report, you need a user
name and password to print. For details, see the system administrator.
System Administrator Access at the Control Panel
1.
At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2.
Press the
Log In/Out
button.
3.
Type
admin
and touch
Next
.
4.
Type the
Admin Password
and touch
Enter
. The default password is
1111
.
Disabling the Configuration Report at Startup
1.
In CentreWare Internet Services, click
Properties
>
Services
.
2.
Click
Printing
>
General
.
3.
Under Configuration Report, clear
Print at Power on
.
4.
Click
Apply
to save the new settings or
Undo
to retain the previous settings.
Manually Setting the Ethernet Interface Speed
The Ethernet interface on the printer automatically detects the speed of your network. Any auto-sensing
devices connected to the network, such as a hub, do not always detect the correct speed. Refer to the
configuration report to ensure that the printer detects the correct network speed.
1.
At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2.
Touch
Network Settings
>
Advanced Settings
.
3.
When the warning message appears, touch
Continue
.
4.
Touch
Ethernet Physical Media
.
5.
Select the speed to match the speed of your hub or switch.
6.
Touch
Save
, then touch
Close
.
Assigning a Network Address
The printer automatically acquires a network address from a DHCP server by default. To assign a static IP
address, configure DNS server settings, or configure other TCP/IP settings, see
IP
on page 28.
Содержание ColorQube 8700
