Administrator Tools
Xerox
®
ColorQube 8580/8880 Color Printer
73
System Administrator Guide
Updating Firmware
You can update your printer when Xerox releases a new version of printer software or firmware.
CAUTION:
•
Do not interrupt the firmware installation process. Interruptions or loss of power can corrupt the
firmware and render the system temporarily unusable.
•
Do not submit a print job to the device while upgrading firmware. If you interrupt a firmware
upgrade, it can cause corruption to the printer firmware that can require a service call.
Notes:
•
Firmware updates can change some printer factory settings. Xerox recommends that you print the
Configuration Page as a reference to restore printer settings as needed after the firmware update
completes.
•
If you set the PostScript and PJL Configuration password, the printer prompts you to log in. For
details, see
Administrative Security Settings
on page 49.
Before You Begin
Before you update the printer firmware, verify that the latest firmware version is older than the one you
want to install.
Verifying the Latest Version of Firmware
To print the Configuration Page:
1. At the printer control panel, to navigate to the Information Menu, use the arrows, then press
OK
.
2. Navigate to Information Pages, then press
OK
.
The Configuration Page is highlighted by default.
3. To print the Configuration Page, press
OK
.
4. On the Configuration Page, under General Information, locate the current firmware version.
To locate firmware:
1.
To locate firmware for your printer, go to the Xerox support website, then click
Drivers &
Downloads
.
2.
Ensure that the latest version of firmware on the website is newer than the version that appears on
the printer Configuration Page.
Содержание ColorQube 8580
