Xerox ColorQube 8580, Руководство системного администратора

Страница: 26 / 93

Network Connectivity
26 Xerox
®
ColorQube 8580/8880 Color Printer
System Administrator Guide
9. To enter the TCP/IP settings manually, type the printer IP Address.
The format is x.x.x.x, where x represents a decimal number from 0 through 255. The value entered
must be a valid IP address. It cannot be 0.0.0.0, 255.255.255.255, or any address starting with 127
or a number from 224 through 254.
10. For Network Mask, type the network mask.
The format is x.x.x.x, where x represents a decimal number from 0 through 255.
11. For Router/Gateway Address, type an address.
This address serves as the host that retransmits the packets from the current network segment to
another network segment.
12. Click Save Changes .
TCP/IPv6 Settings
Use TCP/IPv6 to configure an IPv6 network address for the printer. You can have multiple IPv6
addresses.
Configuring IPv6
1. In CentreWare Internet Services, click
Properties
>
Protocols
.
2. Click
TCP/IP
.
3. Click
TCP/IP (v6)
.
4. To enable TCP/IP v6, select the check box.
5. For Interface ID, select an option.
− To compute the interface identifier from the MAC address associated with the interface, select
Use Interface ID derived from MAC address .
− To configure the Interface ID manually, select Use this Interface ID , then type the interface
identifier. Only use valid hexadecimal digits 0–9, a–f, or A–F.
Note: If you change the Interface ID, the printer prompts you to restart before the changes take
effect.
6. To enable automatic router address assignment, for Automatic Address Assignment, select Use
router supplied prefixes
.
7. To specify how IPv6 uses DHCP, for DHCPv6, select an option.
8. For Manual Address Assignment, select
Use this address
, then type the IPv6 address and prefix
length.
9. To set the priority when both IPv6 and IPv4 addresses are available, for Address Precedence, select
Prefer IPv6 addresses
or
Prefer IPv4 addresses
.
10. Click
Save Changes
.