Xerox ColorQube 8580, Руководство системного администратора

Страница: 61 / 93

Security
Xerox
®
ColorQube 8580/8880 Color Printer 61
System Administrator Guide
Disabling IPsec
If an IPsec policy is configured incorrectly, it can cause the printer to become unavailable on the
network. To re-establish printer connectivity, disable IPsec.
To disable IPsec in CentreWare Internet Services:
1. In CentreWare Internet Services, click
Properties
>
Security
.
2. Click IPsec .
3. Click
Security Policies
.
4. For IPsec, select
Off
.
To disable IPsec at the printer control panel:
1. At the printer control panel, use the arrows to navigate to
Printer Setup > Connection Setup >
Network Setup
>
Network Services
.
2. Navigate to IPsec, then press
OK
.
3. For the new settings to take effect, restart your printer.
Managing Security Policies
IPsec security policies are sets of conditions, configuration options, and security settings that enable two
systems to agree on how to secure traffic between them. You can have multiple policies active at the
same time, however, the scope and policy list order determines the overall policy behavior.
Adding an IPsec Policy
1. In CentreWare Internet Services, click
Properties
>
Security
>
IPsec
.
2. Click
Security Policies
.
3. For Hosts, select an option, or click
Add Host Group
, configure as needed, then click
Save Changes
.
4. For Protocols, select an option, or click
Add Protocol Group
, configure as needed, then click
Save
Changes .
5. For Actions, select an option, or click Add IPsec Action , configure as needed, then click Save
Changes
.
6. Click
Add Policy
.
7. Click
Apply
.
8. Click
Continue
.
Modifying or Deleting an IPsec Policy
1. In CentreWare Internet Services, click Properties > Security > IPsec .
2. Click Security Policies .
3. To modify, click the name, modify as needed, then click Save Changes > Apply .
4. To delete a policy from the list, click Select > Delete .
5. To reset security association sessions, restart the printer.