
Maintenance
126
Xerox
®
ColorQube 8580/8880 Color Printer
User Guide
Turning Off the Printer
The Shutdown for Moving Printer option causes the fan to run and displays a cool-down time of 30
minutes on the control panel. When the printer is cool enough to move, the printer fan shuts down.
Note:
When you want to shut down the printer but do not need to move it, you can use the Standard
Shutdown option.
To turn off the printer:
1.
To turn off the printer, on the right rear sided of the printer, under the I/O door, use the power
switch.
2.
Within 30 seconds, at the control panel, select
Shutdown for Moving Printer
, then press
OK
.
3.
After the cool-down cycle is complete, unplug the printer.
CAUTION:
Do not unplug the printer until the cooling sequence completes and the printer turns off.
Packing the Printer for Shipment
Repack the printer and its options using the original packing material and boxes or a Xerox
®
Repackaging Kit. Additional instructions for repacking the printer are provided in the Repackaging Kit. To
uninstall options, reverse the steps in the installation instructions. If you do not have all the original
packaging, or are unable to repackage the printer, contact your local Xerox reseller, or go to:
•
Xerox
®
ColorQube 8580 Color Printer
www.xerox.com/office/CQ8580support
•
Xerox
®
ColorQube 8880 Color Printer
www.xerox.com/office/CQ8880support
CAUTION:
Failure to repackage the printer properly for shipment can result in damage not covered
by the Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee. The Xerox
®
Warranty,
Service Agreement, or Total Satisfaction Guarantee do not cover damage to the printer caused by
improper moving.