25
Multi-Pass application
of Metallic Dry Inks
For both print servers, Multi-Pass
application of Metallic Dry Inks
is a manual process.
Preparing to print with
Xerox
®
FreeFlow
®
Print Server
As instructed in the design steps, start
by creating an additional PDF that
isolates the desired metallic objects.
Preparing to print with Xerox
®
EX-P
1000i Print Server Powered by Fiery
®
Either create an additional PDF in the
design phase, or isolate the specific
separations containing Metallic Dry Inks
using the Fiery ImageViewer.
Note: When designing for Multi-Pass, it
is important that the isolated metallic
objects align perfectly to the original file.
1
Process and hold the file, then
right click and
duplicate
the job.
2
Rename
the duplicate job.
3
Right click the duplicate job
and open
ImageViewer
.
4
Under Separations, uncheck
the CMYK options so that only
Silver
or
Gold
is selected.
5
Save the changes and close
the
ImageViewer
.
4
3
Xerox_MetallicDryInksDesignGuide_4c_030915_SPG_FINAL.indd 25
3/9/15 11:55 AM
