12
Phaser 860 Color Printer
TCP/IP Configuration
PhaserPort for MacOS System Requirements
■
Macintosh PowerPC.
■
Apple's LaserWriter version 8.6 or later, with Desktop Printing enabled.
■
OpenTransport version 1.1 or later networking. TCP/IP networking provided by
MacTCP software is not supported. The Macintosh must be properly configured to
communicate with the printer (see
page 11
).
Files and Installation
PhaserPort for MacOS consists of two files:
■
PhaserPortLib,
a special type of shared library recognized by the LaserWriter driver
version 8.6.
■
PhaserPort Printer Tool,
a Macintosh PowerPC application for creating desktop
printers that communicate with
PhaserPortLib.
To install PhaserPort for MacOS:
1.
Copy
PhaserPortLib
into the folder
System Folder: Extensions: Printing Plug-Ins.
2.
Copy the
PhaserPort Printer Tool
to any folder on the Macintosh.
Creating a Desktop Printer With PhaserPort for MacOS
1.
Launch the
PhaserPort Printer Tool.
2.
In the
Printer Internet Address
field, type the printer’s IP address or DNS name.
3.
In the
Desktop Printer Name
field, type a name for the desktop printer.
4.
Click
Verify
to contact the printer over the TCP/IP network and verify it's network
configuration.
5.
Click
Create
to create the desktop printer.
6.
In the Finder, use the Printing Menu's Setup command to finalize the configuration of
the new desktop printer.
Note
Certain utilities, such as Adobe Font Downloader, are not compatible with
PhaserPort for MacOS software, because they attempt to directly communicate
with the printer using the AppleTalk protocol. If you must use this software,
create an AppleTalk desktop printer, and then delete this printer after running
and quitting the non-compatible software.
Содержание 860N - Phaser Color Solid Ink Printer
Страница 1: ...P H A S E R 8 6 0 C O L O R P R I N T E R N e t w o r k i n g S e t u p G u i d e ...
Страница 2: ......
Страница 3: ...Phaser 860 Color Printer Networking Setup Guide June 2001 ...
Страница 42: ......