Xerox 8080, Руководство по безопасности

Страница: 9 / 20

Safety information
Xerox DocuColor 8080 Digital Press
Safety Guide 5
• Do not override or disable electrical or mechanical interlocks.
• Do not obstruct the ventilation openings. These openings prevent overheating of the machine.
Emergency Power off
If any of the following conditions occur, immediately switch off the power to the machine and disconnect the
power cord from the electrical outlet. Call an authorized Xerox service representative to correct the problem.
• The machine emits unusual noises or odors.
• The power cord is damaged or frayed.
• A wall panel circuit breaker, fuse, or other safety device is tripped.
• Liquid is spilled into the press.
• The machine is exposed to water.
• Any part of the machine is damaged.
Electrical supply
This product shall be operated from the type of electrical supply indicated on the product data plate label. If you
are not sure that your electrical supply meets the requirements, please contact a licensed electrician for advice.
Disconnect device
The power cord is the disconnect device for this equipment and is attached to the back of the machine as a plug-
in device. To remove all electrical power from the machine, disconnect the power cord from the electrical outlet.
WARNING:
Never push objects of any kind into slots or openings on this equipment. Making a contact with
a voltage point or shorting out a part may result in fire or electrical shock.
WARNING:
This equipment must be connected to a protective earth circuit. This equipment is supplied with
a plug that has a protective earth pin. This plug will only fit into an earthed electrical outlet. This
is a safety feature. If you are unable to insert the plug into the outlet, contact a licensed
electrician to replace the outlet.
CAUTION:
Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet
checked by a licensed electrician.
WARNING:
This product must be connected to a protective earth current.