Xerox 8080, Руководство по безопасности, Страница: 10 / 20

Safety information
Xerox DocuColor 8080 Digital Press
Safety Guide
6
Laser safety
North America
This product complies with safety standards and is certified as a Class 1 Laser product under the Center for
Devices and Radiological Health (CDRH) of the United States Food and Drug Administration (FDA) implemented
regulations for laser products. This product complies with FDA 21 CFR 1940.10 and 1040.11 except for
deviations pursuant to Laser Notice No. 50, dated June 24, 2004. These regulations apply to laser products
marketed in the United States. The label on the machine indicates compliance with CDRH regulations and must
be attached to laser products marketed in the United States. This product does not emit hazardous laser
radiation.
Since radiation emitted inside this product is completely confined within the protective housing and external
covers, the laser beam cannot escape from the machine during any phase of the user operation.
This product contains laser warning labels. These labels are intended for use by the Xerox Service Representative
and are placed on or near panels or shields that require special tools for removal. Do not remove any of the
panels. There are no operator serviceable areas in these covers.
Europe (EU)
This product complies with IEC’s safety standard 60825-1 (Edition 1.2) issued August 2001.
The equipment complies with laser product performance standards set by governmental, national, and
international agencies as a Class 1 Laser Product. It does not emit hazardous radiation as the beam is totally
enclosed during all phases of customer operation and maintenance.
This product contains laser warning labels. These labels are intended for use by the Xerox Service Representative
and are placed on or near panels or shields that require special tools for removal. Do not remove any of the
panels. There are no operator serviceable areas inside these covers.
If you need additional safety information concerning the product or Xerox supplied materials, you may call the
following number:
+44 (0) 1707 353434
CAUTION:
Use of controls or adjustments or performance of procedures other than those specified
hereinmay result in hazardous exposure of laser light.
CAUTION:
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.