Xerox 8080, Руководство по безопасности, Страница: 6 / 20

Safety information
Xerox DocuColor 8080 Digital Press
Safety Guide
2
Radio frequency emissions
FCC in the USA
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his/her own expense.
Changes or modifications to this equipment not specifically approved by the Xerox Corporation may void the
user’s authority to operate this equipment.
In Canada (ICES-003)
This Class “A” digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe “A” est conforme á la norme NMB-003 du Canada.
Regulatory information for RFID
This product generates 13.56 MHz using an Inductive Loop System as a Radio Frequency IDentification system
device (RFID). This system is certified in compliance with European Council Directive 99/5/EC and applicable
local laws or regulations as applicable.
Operation of this device is subject to the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this equipment not specifically approved by Xerox Corporation, may void the user’s
authority to operate this equipment.
Safety extra low voltage approval
This Xerox product is in compliance with various governmental agencies and national safety regulations. All
system ports meet the Safety Extra Low Voltage (SELV) circuits for connection to customer-owned devices and
networks. Additions of customer-owned or third-party accessories that are attached to the press must meet or
exceed the requirements previously listed. All modules that require external connection must be installed per the
installation procedure.
WARNING:
Shielded cables must be used with this equipment to maintain compliance with FCC regulations.