manualshive.com logo in svg

Xerox 770, Руководство системного администратора

Поделиться
Скачать
Xerox 770 Скачать руководство пользователя страница 65

18. Select Save.
19. Select Close until the Adjust Fold Position screen appears.
20. Select the tray in which you loaded paper in step 1, and then press the Start button.
21. Select the adjusted fold position type, and select Save.
22. Continue to select Save or Close until you are returned to the main Tools tab display.
23. Exit administrator mode.

Adjusting the Booklet Fold position

NOTE

Adjust Fold Position can be access from three separate areas in Common Service
Settings (Tools/administrator mode):

• Tools > System Settings > Common Service Settings

 > Paper Tray Settings > Custom Paper Settings

• Tools > System Settings

 > Common Service Settings > Paper Tray Settings > Paper Tray Attributes

• Tools > System Settings  > Common Service Settings > Maintenance

1. Load paper in the desired tray.
2. Login as administrator.
3. Access the Tools tab on the UI.
4. Select  System Settings  > Common Service Settings.
5. Select one of the following:

• Paper Tray Settings  > Custom Paper Settings

• Paper Tray Settings  > Paper Tray Attributes

• Maintenance > Finisher Adjustment

6. Select Adjust Fold Position.
7. Select Fold Position Type Setup, and select Change Settings.
8. Select Booklet and select Change Settings.
9. Press Sample Printout.

10. Select the tray in which you loaded paper, select 2-Sheet Stack, and press the Start

button.
An output sample is printed.

11. Select the tray in which you loaded paper, select 15-Sheet Stack, and press the Start

button.
An output sample is printed.

12. Select Close.
13. Check the output sample, and measure the position offset amount for 2-sheet stack

and 15-sheet stack.

14. Press Booklet Fold State (2 Sheets).
15. Select the state of the fold and staple position of the output paper, and enter the

2-sheet stack offset amount you measured in previously in Values A & B Before
Adjustment field.

16. Select Save.

2-49

Xerox

®

 770 Digital Color Press

System Administration Guide

System Settings  > Common Service Settings

Содержание 770



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды