Xerox 770, Руководство системного администратора

Страница: 52 / 114

Offset Stacking (Stacker - Stacker Cart)
This feature is available only when the High Capacity Stacker (HCS) is connected to
the machine. Offsetting means that each copy set is delivered to the center tray and
shifted slightly to separate it from the previous job. When a copy set is delivered to the
front of the tray, the next set is delivered to the rear of the tray. Options for the offset
function for the High Capacity Stacker include the following:
• None: If this option is selected, the finishing tray will not offset any output.
• Offset per set: If this option is selected, the finishing tray will offset each set of a
copy/print job. This option also offsets each job.
• Offset per job: If this option is selected, all the sets of a job are delivered on one
stack to the output area. When the next job starts, that job is offset from the previous
job in the tray. This option does not offset each set of a job.
When Offset per Set or Offset per Job is selected, the machine slightly shifts the output
position per set or per job (print job) respectively.
Unload High Capacity Stacker
This feature is available only when the High Capacity Stacker (HCS) is connected to
the machine. Allows you to determine the timing to stop the machine when the
Unload Output button is pressed. Select either Stop When Current Set Completes
and Stop Immediately.
Default Print Paper Size
Set the default paper size, A4 or 8.5 × 11 in. on which to print reports and/or lists.
Paper Size Settings
Specify the size of paper to be automatically detected when you use standard sizes
for a document or the machine is set to detect sizes of a document. Select one of the
following options:
• A/B Series (8 × 13 in.)
• A/B Series
• A/B Series (8K/16K)
• A/B Series (8 × 13 in./8 × 14 in.)
• Inch Series
Millimeters/Inches
Select the unit of measurement that will be displayed on the screen; select either
Millimeters or Inches.
Keyboard Input Restriction
Select whether or not to restrict the display of the virtual keyboard on the machine UI.
To prevent characters from being garbled when switching character sets, you can limit
input to ASCII characters. If you select On (ASCII Only), the keyboard displayed shows
ASCII characters only.
Xerox
®
770 Digital Color Press
2-36
System Administration Guide
System Settings > Common Service Settings