Xerox 770, Руководство системного администратора

Страница: 46 / 114

2. Access the Tools tab on the UI.
3. Select System Settings > Common Service Settings.
4. Select Maintenance.
The Maintenance screen displays.
5. Select Adjust Paper Curl.
6. Select one of the Type 1-10 items.
7. Select Change Settings.
8. Assign the desired parameters to the paper curl Type (1-10) option.
a) Select the Name field.
b) Use the keyboard to enter a name.
c) Select the appropriate settings for 1 Sided-Face Up, 1 Sided-Face Down, and 2
Sided output.
Use the arrow buttons to select the correct amount of curl.
NOTE
Selecting Auto lets the system automatically adjust the paper curl.
d) Select Sample Printout.
Review the sample for paper curl. If the sample printout still continues too much
curl, further adjust the paper curl parameters and print another sample printout.
9. Continue adjusting the paper curl parameters until satisfied with the printouts. Once
a satisfactory printout is achieved, select Save.
The Adjust Paper Curl screen is displayed.
10. Select Close.
The Maintenance screen displays.
11. Select Close.
The main Tools tab screen is displayed.
12. Exit administrator mode.
Maintenance > Alignment Adjustment
1. Load paper in the desired tray.
2. Login as administrator.
3. Access the Tools tab on the UI.
4. Select System Settings > Common Service Settings.
5. Select Maintenance.
The Maintenance screen displays.
6. Select Alignment Adjustment.
7. Select Change Settings.
The Alignment Adjustment Setup screen displays.
8. Select Alignment Adjustment Type Setup.
9. Select Change Settings.
The Alignment Adjustment Type Setup screen displays.
10. Select an alignment item (Type 1-20) to set (create) or adjust (revise).
For the purposes of this procedure Type X represents Type 1-20.
Xerox
®
770 Digital Color Press
2-30
System Administration Guide
System Settings > Common Service Settings