Xerox 6100BD - Phaser Color Laser Printer, Системное руководство

Страница: 77 / 140

Printing
System Guide 4-11
– DocuSP supports values of 1, 3, 6, and 8. Values of 2, 4,
5, and 7 are treated as if they were 1, 3, 6, and 8
respectively.
Photometric Interpretation
– Default = none; value must be supplied.
– DocuSP supports bi-level values of 0 and 1 only.
Resolution Units
– Default = 2
– DocuSP supports values of 2 (inches) and 3 (centimeters)
Rows Per Strip
– Default = none
– DocuSP supports single and multiple strip images.
NOTE: Strips and tiles cannot be intermixed within the same
TIFF file.
Strip Byte Counts and Strip Offsets
– Default = none; values must be supplied if the image data
is organized into strips.
– DocuSP supports single and multiple strip images.
X and Y Resolution
– Default = none
– Values must be supplied for printing.
Tile Width, Tile Length, Tile Offsets, Tile Byte Counts
– Default = none
– Values must be supplied if image data is organized into
tiles.
Administration page controls
DocuSP permits the user to enable or disable the printing of
Administration/Banner pages on a queue or job basis. This
allows the site to control when and how the banner and error
pages are printed.
The default setting by queue is set to enabled. The behaviors
of the banner and error pages follow DocuSP precedence,
that is overrides, job level and so forth.