Xerox 6100BD - Phaser Color Laser Printer, Системное руководство

Страница: 138 / 140

Hints and Tips
9-10 System Guide
/opt/XRXnps/bin/setFontSize In 3.1, allows user to set the font size
on the main GUI to a larger and more
visible size. Both
/opt/XRXnps/bin/setimagepath Disables/Enables Xerox Image Path.
any problems that necessitate using
this utility should be reported to Xerox
development ASAP. Color
/opt/XRXnps/bin/setlcdsDJDEsemicolon Allows for correct printing of a DJDE
that has the incorrect termination
of;END; instead of,END, (J11patch
compatibility). Both
/opt/XRXnps/bin/setcddsDJDEspimm Enables the system to ignore 0x)b in
between DJHDE begin records (J11
patch compatibility). LCDS
/opt/XRXnps/bin/setlcdsPmodeSwop Disables/enables swopping of BEGIN
values when there was a page
orientation switch (J11 patch
compatibility. LCDS
/opt/XRXnps/bin/setlpcopycount Default is to ignore an LPR Copy
Count of 1. Utility to set lpr to accept a
copy count of 1. LCDS
/opt/XRXnps/bin/setpapdbootswitch Sets Appletalk behavior for
AdboePS8.6 foreground job problem if
font list is large. Both
/opt/XRXnps/bin/setsetlineterm
/opt/XRXnps/bin/setsetpclcontrol
(Option1)
Sets the default PCL decomposer line
termination mode (that is, CR.LF). Use
setpclcontrol tool in 3.1. Black and
white
/opt/XRXnps/bin/setpclcontrol (Option2) PCL custom size factory default script
allows DocuSP to better match HPs
variations on customer size imaging. Black and
white
/opt/XRXnps/bin/setpclcontrol (Option3) PCL saves resources function. Gives
capability to save pcl resource from
memory to disk on a job by job basis. Black and
white
/opt/XRXnps/bin/setVPSoption On the socket gateway mainframe
echo commands are stripped by
default. If non VPS streaming clients
are being used, this utility must be run
to avoid data loss. Black and
white
/opt/XRXnps/bin/setBind128 Enables you to bind 128 pages. Black and
white
Table 0-2. Utilities for DocuSP Software
Utility Change Description Focus