manualshive.com logo in svg

Xerox 4215, Руководство пользователя, Страница: 345 / 364

Поделиться
Скачать
Xerox 4215 Скачать руководство пользователя страница 345

<

cut top 2"

cut 1">

DIIIIIIIIHHHHHHHHIIIIIIIIIIIII

Operator Guide

J-11

R

RAM

Random Access Memory.

resident fonts

Resident fonts are the fonts resident
in the printer when shipped.  The
printer’s resident fonts are also
called internal fonts.

restart

To resume a print job run from a point
where it was aborted.

robust

An asynchronous protocol using the
XON/XOFF handshake.  It is different
from normal XON/XOFF, because in the
Robust protocol an XON is sent every
one second by the printer and XOFF is
only sent when the printer experiences
a buffer full and cannot receive any
more data.  The normal XON/XOFF
handshake operates similarly to
Robust, but the printer only sends an
XON after a printer problem has been
corrected (printer not busy), or
initially when the printer is powered
on and is ready (operational).  XOFF
operates the same in both
environments.

ROM

Read Only Memory.

S

scalable font

A font scaled within the printer to

XEROX 4219/MRP Mid Range Systems Printer

XEROX 4215/MRP Mid Range Systems Printer

Содержание 4215













































































































































































































































































































































































Отзывы:

Нет отзывов