Xerox 3150 - Phaser B/W Laser Printer, Руководство по обслуживанию

Страница: 10 / 116

Precautions
1-2
1.2 Safety Cautions
1.2.1 Toxic Material
This product contains toxic materials that could cause illness if ingested.
1. Please keep toner cartridges away from children. The toner powder contained in the toner cartridge may be
harmful and if swallowed you should contact a doctor immediately.
1.2.2 Electric Shock and Fire Safety Precautions
Failure to follow the following instructions could cause electric shock or potentially cause a fire:
1.
Use only the correct voltage, failure to do so could damage the printer and potentially cause a fire or electric
shock.
2.
Use only the power cable supplied with the printer. Use of an incorrectly specified cable could cause the cable to
overheat and potentially cause a fire hazard.
3.
Do not overload the power socket, this could lead to overheating of the cables inside the wall and could lead to a
fire hazard.
4.
Do not allow water or other liquids to spill into the printer, this can cause electric shock. Do not allow paper
clips, pins, or other foreign objects to fall into the printer as these could cause a short circuit leading to electric
shock or fire hazard.
5.
Never touch the plugs on either end of the power cable with wet hands, this can cause electric shock. When
servicing the printer, remove the power plug from the wall socket.
6.
Use caution when inserting or removing the power connector. The power connector must be inserted completely
otherwise poor contact could cause overheating possibly leading to a fire. When removing the power connector,
grip it firmly and pull.
7.
Do not allow the power cable to become twisted, bent sharply round corners or otherwise damaged. Do not place
objects on top of the power cable. If the power cable is damaged, it could overheat and cause a fire or exposed
cables could cause an electric shock. Replace a damaged power cable immediately, do not reuse or repair the
damaged cable. Some chemicals can eat through the coating on the power cable, weakening the cover, or
exposing cables causing fire and shock risks.
8.
Ensure that the power sockets and plugs are not cracked or broken in any way. Any defects should be repaired or
replaced immediately. Take care not to cut or damage the power cable or plugs when moving the printer.
9.
Use caution during thunder or lightening storms. Xerox recommends that this printer be disconnected from the
power source when such weather conditions are present. Do not touch the printer or the power cord if it is still
connected to the wall socket in these weather conditions.
10.
Avoid damp or dusty areas, install the printer in a clean well ventilated location. Do not position the printer near
a humidifier. Damp and dust build up inside the printer can lead to overheating and cause a fire.
11.
Do not position the printer in direct sunlight. This will cause the temperature inside the printer to rise leading to
the printer failing to work properly and in extreme conditions could lead to a fire.
12.
Do not insert any metal objects into the printer through the ventilator fan or other parts of the casing, it could
come into contact with a high voltage conductor inside the printer and cause an electric shock.