![Xerox 3117 - Phaser B/W Laser Printer Скачать руководство пользователя страница 30](http://html1.mh-extra.com/html/xerox/3117-phaser-b-w-laser-printer/3117-phaser-b-w-laser-printer_service-manual_885039030.webp)
System Overview
x
Service Manual
3-17
- Environment Condition
. Operating temperature range : 0
40
. Maintaining temperature range : -20
40
. Preserving Humidity Condition : 10% ~ 90% RH
. Operating atmospheric pressure range : 1atm
- EMI Requirement : CISPR ,FCC, CE, MIC,
- Safty Requrement : IEC950 UL1950, CSA950, C-UL,Semko, EK,CB,
CCC(CCIB),GOST, EPA, Power Save
3.2.6 HVPS board (High Voltage Power Supply)
The HVPS board creates the high voltage of THV/MHV/Supply/Dev and supplies it to the developer part for making
best condition to display the image. The HVPS part takes the 24V and outputs the high voltage for THV/MHV/BIAS,
and the outputted high voltage is supplied to the toner, OPC cartridge, and transfer roller.
1) Transfer High Voltage (THV+)
- Input Voltage : 24 V DC °
15%
- Out Voltage : Max. +1.3KV °
15% (Cleaning,200
)
- Out Voltage Trigger : 6.5
- Input Voltage Variation :
5 % below(Variation 21.6V°
≠
26.4V)
Load Variation :
% below
- Out Voltage Rising Time : 100 ms Max
- Out Voltage Falling Time : 100 ms Max
- Transfer Variation Voltage on Environment Variation : +650 V(Duty 10%) ~ 5KV (Duty 90%)
- Control Method on environment : THV-PWM ACTIVE,transfer Active signal, of environment sensing
voltage is input and get feed back current, and recalculate it to resistence .
- Control method on transfer output voltage : It is controlled by changing its duty of THVPWM Signal as
follows. 10% Duty : +650V, 90% Duty : +5KV
5%
2) Charge Voltage (MHV)
- Input Voltage : 24 V DC
15%
- Out Voltage : -1.3KV ~
3.2%
- Out Voltage Rising Time : 50 ms Max
- Out Voltage Falling Time : 50 ms Max
- Out Voltage Range : 30
~ 1000
- Output Control Signal(MHV-PWM) : CPU is HV output when PWM is Low
3) Developing Voltage (DEV)
- IInput Voltage : 24 V DC
15%
- Output Voltage: -350V
4.6%
- Output Voltage Fluctuation range: PWM Control
- Input contrast of the output stability degree :
5 % or less
- Loading contrast :
5 % or less
- Output Voltage Rising Time : 50 ms Max
Содержание 3117 - Phaser B/W Laser Printer
