21
EN
STAND-ALONE
(no users present during the charge process)
Put the charger in set-up mode, as described earlier.
A ‘0’ will appear in the display screen. By way of pressing on the ‘mode’ button
it is possible to switch between the green and the red led. Adjust the charger
as per the
red
led.
After this wait for 10 seconds.
A number will now appear in the display screen which indicates the charge
setting
. By way of repeatedly pressing the ‘mode’ button it is possible to enter
the required charge setting.
Charge setting
Suggested battery type
GEL, AGM(1)
CALCIUM, AGM(2), SPIRAL
OPEN SEMI-TRACTION
TRACTION
After this wait for 10 seconds.
A ‘t’ will appear in the display screen. Now it is possible to determine if the
optional temperature sensor is
connected. By way of pressing the ‘mode’
button it is once again possible to switch between the green and red led.
Temperature
sensor
Set the LED to
green
present
Temperature
sensor
isn’t
present
Set the LED to
red
.
(factory setting)
No
Yes
Compensation phase on