14
EN
that is supplied is higher than this, then the inverter will break. In
this case the repair costs are not covered by the guarantee.
Temperature protection
If the cooling provided by the fan is insufficient, the temperature
protection will be activated. The inverter will switch off the 230VAC
output. While this protection is activated, a buzzer will sound
five
times
every 8 seconds and the red ‘fault’ led will also flash
five
times
. Once the inverter has cooled down sufficiently, it will restart
automatically.
Short-circuit on the output
The inverter will switch off the 230VAC output voltage if there is a
short-circuit of the output. While this protection is activated, the
red ‘fault’ led will flash continuously. The inverter will restart
automatically, once the problem has been resolved.
Overload protection
The inverter will switch off the 230VAC output voltage if the
requested power on the output (consumers) is greater than the
continuous power of the inverter. While this protection is activated,
the red ‘fault’ led will flash continuously. The inverter will restart
automatically, once the problem has been resolved.
Important
The overload protection only works with the maximum power and
not with peak power. If the peak load on the inverter is exceeded
then the inverter will break! In this case the repair costs are not
covered by the guarantee.
