10
EN
I N T R O D U C T I O N
Read this user manual completely before using the device. In the
appendices you will find the technical specifications of the ES
inverters.
This DC-AC inverter converts a 12 or a 24 Volts DC voltage into a
AC voltage with a pure sine wave (230VAC). With this device it is
possible, with use of the right battery, to supply equipment that
normally requires a mains supply.
Important
Always check the actual power rating of the equipment. In
addition, bear in mind the start-up peaks. These start-up peaks
can be as much as 5-7 times the continuous load. Check whether
these values are within the capacity limits of the inverter.
For the models from 600Watt a remote control is available as an
optional, see page 16.
I N S T A L L A T I O N
Mounting
The inverter must be mounted in a space that complies with the
following:
-
Mount the inverter in a dry place where there is no chance of it
being affected by moisture or dirt.
-
Leave enough space on all sides of the inverter (min. 10cm) for
air circulation. Make sure that there are ventilation vents.
-
The ambient temperature must be between 0ºC and 40ºC.
-
Keep the inverter out of the reach of children.
-
A working inverter produces a dangerous voltage.
-
Do not use the inverter in places where gases are released or
flammable materials are stored.
-
The distance between inverter and battery should be as short as
possible, but place the inverter in a separate room.
