Xenotech BRITELIGHT 10000AR, Руководство по установке

Страница: 18 / 21

PAGE 18
GLOBE MAINTENANCE
IN ORDER TO INSURE MAXIMUM LAMP LIFE THE FOLLOWING PROCEDURES SHOULD BE FOLLOWED EVERY 75 -
100 HOURS OF OPERATION.
GLOBE ROTATION
IF THE FIXTURE IS USED IN A POSITION OTHER THAN POINTED WITHIN 15 % OF VERTICAL THE GLOBE SHOULD BE
ROTATED 1/3 OF A TURN TO INSURE EVEN DEPOSITION OF THE VAPORIZED TUNGSTEN GENERATED BY THE
ARC INSIDE THE GLOBE.
ADJUSTMENT PROCEDURES
1. REFER TO THE INSTRUCTIONS FOR REMOVAL AND INSTALLATION OF THE GLOBE NOTING ALL WARNINGS.
2. FOLLOW THE DISASSEMBLY PROCEDURE FOR A FIXTURE WITH THE GLOBE INSTALLED STEPS 1 THRU 5.
3. WHEN ROTATING THE GLOBE FOR REMOVAL CONTINUE LIGHTLY PRESSING REARWARD ON THE GLOBE.
THE THREADS OF THE GLOBE WILL RIDE OUT OF THEIR CURRENT LEADS AND DROP INTO THE NEXT SET OF
THREADS IN THE RECEIVER BLOCK. WHEN THIS HAPPENS YOU WILL FEEL THE GLOBE DROP DOWN INTO THE
RECEIVER BLOCK.
4. IMMEDIATELY STOP TURNING THE GLOBE AND REVERSE DIRECTION TO SCREW THE GLOBE IN AT THE NEW
ORIENTATION.
5. COMPLETE REINSTALLING THE GLOBE PER THE GLOBE INSTALLATION PROCEDURE.
POWER LEVEL ADJUSTMENT
CHECK THE OUTPUT POWER LEVEL OF THE SYSTEM AND READJUST AS NECESSARY TO MAINTAIN THE OUTPUT
BELOW 10000 WATTS. (SEE POWER ADJUSTMENT PROCEDURES )