User Manual
Bobcat-640-GigE&CL Camera
Company confidential.
This document is the property of Xenics. It may not be reproduced – completely or partially – or passed to a third party
without written permission from Xenics.
Xenics nv
T +32 16 38 99 00
Doc Ref: ENG-2012-UMN020
Ambachtenlaan 44
F +32 16 38 99 01
Issue: R000.12
BE-3001 Leuven
Belgium
www.xenics.com
Date: 29/10/2013
XF-104_02/20-01-2012
Page 22 of 24
6. Getting Started
6.1. Install the Software
First perform the Xeneth installation and when necessary the SDK installation as well (see
chap.
6.2. Connect the Camera Cables
The cable information and interfaces is described in chap.
6.3. Connect the Camera via Xeneth
When connecting the GigE interface: see chap.
otherwise do the following:
Click the Xeneth shortcut on the desktop to start up Xeneth (see
). The
connection dialog will become visible (see
). When the camera is not shown,
click the refresh button on the dialog. Select the camera, together with the calibration data
suited for it. For more details, consult the Xeneth User Manual, section Connection setup
- Settings.
Figure 6-1 Xeneth shortcut
Figure 6-2 Connection dialog - settings
