User Manual
Bobcat-640-GigE&CL Camera
Company confidential.
This document is the property of Xenics. It may not be reproduced – completely or partially – or passed to a third party
without written permission from Xenics.
Xenics nv
T +32 16 38 99 00
Doc Ref: ENG-2012-UMN020
Ambachtenlaan 44
F +32 16 38 99 01
Issue: R000.12
BE-3001 Leuven
Belgium
www.xenics.com
Date: 29/10/2013
XF-104_02/20-01-2012
Page 10 of 24
1.3. Reference Documents
(Ref. 1)
Xenics Serial Protocol
ENG-2011-ICD003
(Ref. 2)
Mechanical Drawings GigE and CL
(Ref. 3)
Auto Gain Control
ENG-2013-UMN006
(Ref. 4)
Auto Exposure Control
ENG-2012-UMN017
(Ref. 5)
XFPA-640 Control and Operation
ENG-2013-ICD007
(Ref. 6)
Network connection setup for GigE
ENG-2013-ICD003
(Ref. 7)
Xeneth Installation Manual (see Xeneth SW directory)
ENG-2012-UMN005
1.4. Conventions Used in This Manual
To give this manual an easily understood layout and to emphasize important information, the
following typographical styles and symbols are used:
The styles used in this manual are:
•
Bold
: used for programs, inputs (commands or parameters) or highlighting important
things
•
Courier New
: used for code listings and output.
•
Italics
: used for modes and fields.
The symbols used in this manual:
Note: This symbol highlights important information.
Warning: This symbol highlights important instructions. These instructions must
be followed to avoid malfunctions!
!
i
