User Manual
Bobcat-640-GigE&CL Camera
Company confidential.
This document is the property of Xenics. It may not be reproduced – completely or partially – or passed to a third party
without written permission from Xenics.
Xenics nv
T +32 16 38 99 00
Doc Ref: ENG-2012-UMN020
Ambachtenlaan 44
F +32 16 38 99 01
Issue: R000.12
BE-3001 Leuven
Belgium
www.xenics.com
Date: 29/10/2013
XF-104_02/20-01-2012
Page 21 of 24
5. Software Installation
Before being able to start the camera, the Xeneth imaging suite (at least version 2.4) and its
graphical user interface must be installed, so that the data coming from a wide variety of
Xenics detectors and cameras can be easily operated on and analyzed.
5.1. Xeneth Installation
It is a good practice to first uninstall a previous Xeneth version when installing a
new one.
Refer to the Xeneth Installation Manual
that is delivered on the CD together with the
camera to install Xeneth.
When using camera link cameras, it is also necessary to pre-install the frame
grabber before installing Xeneth! Refer to the frame grabber manual for
installation instructions.
5.2. SDK Installation
The optional SDK installation is delivered on the CD together with the camera. Install the SDK
software using this file.
After the SDK installation, the SDK manual, together with the samples and header files can be
found in the C:\Program Files\Xeneth\SDK directory.
!
!
