Installation and Users Guide: XenData SX-10 Archive Appliance
Page 12
If an Internet connection is not available to the SX-10 at this time, alternative activation
methods are described in the Administrator Guide for XenData6 Server.
6. The next step is to install device drivers for your LTO drives or tape library. In the case of stand-
alone tape drives, a XenData hardware configuration utility must also be run. The exact
procedure depends on the LTO hardware being used.
Detailed step by step instructions for each of the supported LTO devices are available on the
XenData web site at:
www.xendata.com/support/SX-10/
. Click on
'Installation Information for
Specific Tape drives and Tape Libraries
' and then select your specific LTO devices.
7. Reboot the SX-10 and the system is now ready for use.
3.4 Setting Policies for Archiving to LTO
Please refer to the Administrator Guide for XenData6 Server software.
You may also find the XenData6 Server ‘How To’ Support Videos useful. These are available at:
www.xendata.com/support/SX-10/
.
3.5
Configuring the XenData Alert Module
Please refer to the Administrator Guide for the XenData Alert Module.
