Xenarc 1029, Руководство пользователя

Страница: 13 / 16

13 │ Hardware Installation
3. OSD
• H Position : Adjust the OSD Horizontal position by pressing the left or
right buttons.
• V Position : Adjust the OSD Vertical position by pressing the left or right
buttons.
• OSD Timeout : Adjust the time out of the OSD.
• Transparent : Adjust the transparency of the OSD screen image.
4. Setup
• CCD First : Set whether to have monitor switch to CCD signal
automatically if a signal is present. ( Default is OFF )
• Auto sensor : Enable or disable the auto sensor of surrounding
environment.
─“
On
”
means the monitor can automatically adjust the brightness of
the display according to the surrounding environment.
─
Please note : While auto sensor is enabled, the option of dimmer or
backlight inside the OSD can not work until auto sensor is disabled.
• Source Info : Select to turn OFF or turn ON displaying of On Screen
Source Information.
• Source Name : Display the source of input signal. If it is ON, it will
display the information on the left corner of the screen when Display
button is pressed on remote control. ( Default ON )
• Mirror Hor : Adjust the horizontal mirroring position. If it is ON, the image
will be on the left and right side. ( Default OFF )
• Mirror Ver : Adjust the vertical mirroring position. If it is ON, the image
will be on the upper and lower side. ( Default OFF )