4
Installation Guide
On-site installation procedure PV monitoring with Xemex KWHIQ meter
After starting: the firmware version of the meter is first shown on the display (briefly).
Auto scroll mode (4 screens)
This is followed by the active energy consumed so far in 0.001 kWh (code 1.8.0)
After 5 seconds, this is automatically followed by the active energy delivered so far in 0.001 kWh
(code 2.8.0)
After 5 seconds, the current power consumption in 0.001 kW (code 1.7.0) is automatically displayed
After 5 seconds, the current power consumption in 0.001 kW (code 1.7.0) is automatically displayed
Then, after 5 seconds, it starts again at the beginning of the display cycle (back at code 1.8.0)
Manual scroll mode (21 values)
Scroll through the list of values by briefly (> 0.2s & < 2s) pressing the upper blue button. After 60
seconds without pressing this button, the display will return to auto scroll mode.
