SB-02&05
User Manual
XELTEK Automatics
SB0X
XELTEK. 2019. All rights reserved.
User Manual
Rev. 03 - 5th MAY 2020
15 of 200
4.2.2.
Visual parameters
Camera: 512x512 pixels.
Visual Range: 30mmx30mm
Visual system adjustment accuracy: x= y=0.07 mm,
θ
=0.1
°
4.2.3.
Input and output components
A. Fixed Tray: The loading capacity of the tray disk is one.
B. Automatic Tray: To be burned tray disk load of 15 sets, place the trays in the position to
be programmed, click on the automatic Tray touch screen, it will automatically send a plate
to the host designated position and automatically moved out to the position (optional) after
the tray finished.Laser marks can be optional when the tray is on the way back.
C. Tape in: Tape feeder, strap width depends on the chip.
D. Tape out: Tape out machine, compile the bandwidth degree 12~40mm, air pressure or
heat seal.
E. Tube in: Tubular feed, the user can adjust the mounting position of each pipe according
to the width of the pipe used, can install up to 4, at the same time, the corresponding pipe
front end connecting block should be selected.
F. Tube out: Tubular discharge, according to the size of the chip different users need to
replace the different feeder mounting board, up to 4 parallel
4.2.4.
Power supply
Operating voltage
:
200~245V/50~60Hz.
Power
:
2KW.
4.2.5.
Air pressure
Pressure
:
0.6MPa.
Flow
:
130l/min