SB-02&05
User Manual
XELTEK Automatics
SB0X
XELTEK. 2019. All rights reserved.
User Manual
Rev. 03 - 5th MAY 2020
4 of 200
1.
System introduction
1.1.
About this manual
This manual applies to SB02 & SB05 & SB05E & SB05X & SB05EX programming
systems.In addition to special instructions, this document is fully applicable to all the
systems.
1.2.
Model comparison
2.
System Operations
2.1.
Installation
Please set the machine to a horizontal location and suspend the rolling wheel with a
height adjustment device.
The power plug should be connected to the I/F cable, please secure it in place.
2.2.
Steps of power on/off
Power on
：
Visually check that the machine is in normal condition and turn on the
switch to on state;
Waiting for the industrial computer ready;
Press the control buttons on the front panel, respectively, for the
system button and programmer control button;
Open the application SB0X and SP7500 to enter debugging or working
status.
Power off
：
End the session and move the mechanic arms to the home point,then
Turn off the applications ,the industrial PC,the control button in turn.
2.3.
Introduction for the applications
SB0xprogramming system consists of two parts
，
the mechanic application SB0X and
the programming software SP7500.
SB02
SB05
SB05X
SB05E
SB05EX
Model
SP7500
SP7500
SP108X
SP7500
SP108X
Maximum
programmer
4
8
6
4
4
Maximum
sockets
16
32
48
16
32
Nozzles
1
4
4
2
2
I/O
tape&tube&tray
tape&tube&tray
tape&tube&tray
tape&tube&tray
tape&tube&tray
