46
socket’ prompts the user to insert the chip into the socket properly. If the chip has
been inserted incorrectly, refer to the “Device Pin Insertion Test”. After the chip
is placed properly, the software automatically starts the ‘Auto’ operation.
The programmer waits for the taking-out of the chip. “Please, remove the device
from the socket” prompts the user to take out the chip because programming has
been finished. At this moment, check the programming result, check whether it
has succeeded or failed, according to the info in the ‘Operation Info’ window. To
end the production mode, please click ‘Cancel’ button on the right side of status
bar.
4.1.4.4 Log File
Save the information in the Operation Information window in a file. In the execution
process of the program, some content and data are written to the file when the
program exits.
1. No saving. If the file exists, it will be deleted.
2. Every time the program is started, the old records in the file will be deleted.
3. Every time the program is started, the new records will be added after the old
records.
4. The full path name of the log file. It can be edited.
4.1.5 Project
The project file is a file in which all the current working environment is saved. It
includes:
The current device's info, such as the manufacturer name, the device type, the
