31
E Field Fuse Data Edit dialogue box. Please refer to the chapter of Fuse Buffer.
4.1.2.5 Edit the Test Vector Table
The test vector table is a special data area. The data buffer corresponding to the data
is called the test vector table.
If a test vector table is included in the JEDEC file, the software will load the test
vector table into the buffer when the JEDEC file is loaded. Each line displays one
vector and each bit represents one pin's test characteristic. The bits from left to right
correspond to the pins from the first to the last respectively.
Z: High impedance state
X: No care state
N: VCC or GND (non-test input pins)
H: Output Logic High (VOH)
