28
Fill Data boxes, and specify the start address and end address. For the Fuse Buffer
Edit window, the data will be either 1 or 0.
For the Data Buffer
(HEX/ASCII data)
Edit window, the data will be HEX numbers, for
example AA, 55, E4.
Copy:
This function displays Copy Buffer dialog box. It consists of Start Address, End
Address, New Address input lines and OK and Cancel buttons. Data between start
address and end address will be copied to the buffer beginning with new address.
Swap:
Swap high byte and low byte according to the specified word width in the address
range.
For example, assuming data buffer addresses 0-10(HEX) is:
12 34 56 78 90 AA BB CC - DD EE FF 11 22 33 44 55
The word width for selecting is:
16 Bits (2 bytes), after swapping the data is:
34 12 78 56 AA 90 CC BB - EE DD 11 FF 33 22 55 44
32 Bits (4 bytes), after swapping the data is:
78 56 34 12 CC BB AA 90 - 11 FF EE DD 55 44 33 22
64 Bits (8 bytes), after swapping the data is:
CC BB AA 90 78 56 34 12 - 55 44 33 22 11 FF EE DD
Radix:
