14 |
P a g e
FRAMELINE MENU SETTINGS
Factory Preset: ON, Zebra bar White & Blue, Width 1
The single frameline has no preset aspect ratios. You can adjust it over the entire height and width of the
video field up to 2 pixels from all edges.
>
FRAMELINE
ON/OFF
TOP EDGE
ADJ UP/DOWN
BOTTOM EDGE
ADJ UP/DOWN
LEFT EDGE
ADJ UP/DOWN
RIGHT EDGE
ADJ UP/DOWN
COLOR
BLACK, WHITE, RED, GREEN, BLUE, ZEBRA BAR WHITE&BLACK,
WHITE&RED, WHITE&GREEN, WHITE&BLUE
LINE WIDTH
1, 2, 3, 4
INTENSITY
20-100%
(20% increments adjusts the frameline color intensity)
BORDER SHADING
0-100%
(10% increments shades the background outside frameline)
EXIT MENU
FRAMELINE: OFF, ON.
Frameline on, off control.
TOP EDGE:
ADJ UP/DOWN
.
Up/down pushbuttons moves the frameline up and down.
BOTTOM EDGE: ADJ UP/DOWN
.
Up/down pushbuttons moves the frameline up and down.
LEFT EDGE:
ADJ UP/DOWN
.
Up/down pushbuttons moves the frameline left and right.
RIGHT EDGE: ADJ UP/DOWN
.
Up/down pushbuttons moves the frameline left and right.
COLOR:
BLACK, WHITE, RED, GREEN, BLUE, ZEBRA BAR WHITE&BLACK, WHITE&RED,
WHITE&GREEN, WHITE&BLUE.
Adjusts the color of your
FRAMELINE
. You can also
modify the selected color or shading by adjusting the color
INTENSTY
settings.
LINE WIDTH: 1, 2, 3, 4
Adjusts the frameline width. Line width appearance varies depending
monitor resolution. A full 1080 LCD screen will have thinner lines than a 1280 LCD screen at the same
setting.
INTENSITY:
20-100%.
Sets the color intensity of the frameline display. Adjusts intensity in 20%
increments.This will change the shade of the colored level display to different shades of that selected
color.
BORDER SHADING: 0-100%.
Adjust the shading outside the single frameline in 10% increments.
0% represents no video (opaque), 100% no shading at all (transparent).
EXIT MENU:
Allows you to select it to exit the
MENU
pages
or you can allow it to “time out”.
NOTE: In
HSLIDER
and
2D SLIDER
Level Mode, the
FRAMELINE
positioning controls the level indicators position.
Since the
SLIDERS
ride directly on top of the frameline, these two level displays can only be moved in the
FRAMELINE MENU
.
