18
VIPER MIG 135
OPERATING MANUAL
MIG: Machine Setup (Gas-Shielded)
-
-
-
-
21.
Select wire size according to the wire spool installed.
22.
Adjust synergic power knob according to material
thickness. Use a higher value for thicker material, and a
lower value for thinner material.
23.
Connect earth clamp to your workpiece.
24.
Line up the torch with your workpiece, then simply pull
the trigger to initiate the weld. For gas-shielded MIG,
the push method is recommended for optimum weld
quality. Release trigger to end the weld.
