11
VIPER MIG 135
OPERATING MANUAL
6. MIG: Machine Setup (Gasless)
ON
OFF
GAS IN
1.
Connect the polarity cable to the
negative (-)
dinse
connection, twist to lock in place.
2.
Connect the earth clamp to the
positive (+)
dinse
connection, twist to lock in place.
3.
Connect the plug into a 10 AMP socket, then switch the
machine ON.
4.
Pull up the roller tension knob to release the wire drive.
5.
Unscrew the roller cap.
6.
Ensure you have a Knurled (F Groove) drive roller
installed. If not, fit correct roller and replace the roller
cover.
