2–14
975-0411-01-01
This guide for use by qualified installers only
4. Remove an AC wiring knockout from the side or front of the unit.
5. Install a supplied strain-relief clamp in the AC knockout.
In Figure 2-6, the strain-relief clamp is shown installed on the front.
6. Locate the terminal block (see Figure 2-7).
The output terminals are labeled N (neutral), L (line), and G (ground).
Figure 2-6
AC Wiring Compartment Cover and Knockout Locations
AC cover
AC knockout with
strain-relief clamp
AC knockout
Содержание XPower 5000
Страница 1: ...by This guide for use by qualified installers only XPower Inverter 5000 Installation Guide...
Страница 8: ...viii...
Страница 10: ...x...