Xantrex XPLORE 120A 12V, Руководство пользователя, Страница: 46 / 72

32 XPLORE 120/12 Battery Charger Owner's Guide
Step 5: Powering Up
Make one last check that all connections are correct and secure.
The XPLORE Charger may now be powered up.
1. Close the DC disconnect switch or breaker.
2. Switch the AC (mains) power on at the source breaker. It is
normal to see a seven to ten second delay while the charger
powers up.
NOTE: Battery qualification may not be correctly performed if AC
power is switched on first.
NOTE: The onboard status LEDs will also illuminate momentarily
with DC power alone when DC power is applied and the minimum
battery voltage (that is, the connected batteries) is above 9 V.
Figure 16 LEDs when powered
Status
Power Standby Error
Bank 1 2
Battery
Type
3 4 5 6
FLD GEL
LFP AGM
CUS
FLD GEL
LFP AGM
CUS