Xantrex XKW 12-150, Руководство по эксплуатации

Страница: 71 / 90

Operation
Using the Shutdown Function
Revision A
69
Table 3.4
Relay and Switch Settings for Contact Closure
The red S/D (Shutdown) LED on the front panel lights up when the Shutdown circuit
is activated.
Figure 3.19
Using Shutdown with Contact Closure of a Normally OPEN Relay
(Positive Logic)
Relay Switch SW1-8 Setting Relay Coil State Output
Normally Open Relay OPEN (Positive Logic) Energized OFF
De-energized ON
CLOSED (Negative Logic) Energized ON
De-energized OFF
Normally Closed Relay OPEN (Positive Logic) Energized ON
De-energized OFF
CLOSED (Negative Logic) Energized OFF
De-energized ON
RELAY COIL DE-ENERGIZED = OUTPUT ON
(AS SHOWN)
RELAY COIL ENERGIZED = OUTPUT OFF
RELAY
NORMALLY OPEN
15
6 2
14
1
25
13
J3
OPEN (OFF)
CLOSED (ON)
2 3 4 5 6 7 8 1
SW1
JMP2
A
B
C
TM-25OP-01XN.book Page 69 Monday, April 5, 2004 8:58 AM