Xantrex PROsine 2.0, Руководство пользователя

Страница: 74 / 148

Configuration
4–6 445-0089-01-01
Part 3: Configuration Options
This section gives you information about the options on each configuration menu.
Refer to this section when you are changing system settings.
The information in this section is arranged as follows:
• Each configuration menu is identified by a heading (e.g.
Configure
PROsine—Basic Menu
).
• The heading is followed by a two-column table that gives you a “thumb nail”
overview of the menu.
• The left column lists the items on this menu.
• The right column indicates whether the access mode is: User , Installer-
Only , or Read-Only.
• The menu items or information displayed is explained after the table.
Clear Errors in PROsine
Menu Choices or Information Displayed When an error has occurred, you
can select:
• Yes
• No
This acknowledges the error and tells the PROsine that you have attempted to
clear the error condition and it should attempt a restart.
Whichever action you choose, the last twenty faults are recorded, and you can
view them for diagnostic or troubleshooting purposes. For information about
Warnings, Errors, and Panel Faults, see Chapter 6, “Troubleshooting”.
Important:
If you try to change data on a screen that contains read-only data, the
following message appears for one second:
u
Read-Only Data
Press any key to remove this message.
Menu Item Access
Clear Errors
Note: This configuration menu only appears
when an error is active in the PROsine.
User