Xantrex Freedom XC 1000 страница 13 Скачать руководство пользователя | Manualshive

Страница: 13 / 108

background image

Regulatory

975-0784-01-01

xiii

NOTICE

RISK OF INVERTER/CHARGER DAMAGE

n

Never allow battery acid to drip on the inverter/charger
when reading gravity, or filling battery.

n

Never place the Freedom XC unit directly above batteries;
gases from a battery will corrode and damage the
inverter/charger.

n

Do not place a battery on top of the inverter/charger.

Failure to follow these instructions can result in equipment
damage.

Regulatory

The Freedom XC inverter/charger is certified to appropriate US
and Canadian standards. For more information see

approvals on page 90

.

The Freedom XC inverter/charger is intended to be used for
recreational, commercial, or other mobile applications. This
inverter/charger is designed for marine applications only when
additional drip protection is installed in certain orientations. See
the section on Marine Installation for information.

FCC Information to the User

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC / CAN ICES-003 Class B Rules. These limits are designed
to provide reasonable protection against harmful interference in a
residential environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:

n

Reorient or relocate the receiving antenna.

n

Increase the separation between the equipment and
receiver.

n

Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

n

Consult the dealer or an experienced radio/TV technician for
help.

CAUTION

Unauthorized changes or modifications to the equipment could
void the user’s authority to operate the equipment.

«
...
11
12
13
14
15
...
»

Содержание Freedom XC 1000













































































































Отзывы:

Нет отзывов

Похожие инструкции для Freedom XC 1000

Бренд: Xylem Страницы: 4

Бренд: Ravpower Страницы: 14

Бренд: Napa Страницы: 32

Бренд: AML Страницы: 2

Бренд: Dynex Страницы: 2

Бренд: GARO Страницы: 36

Бренд: Motorola solutions Страницы: 122

Бренд: Makita Страницы: 60

Бренд: Philips Страницы: 36

Бренд: LG Страницы: 52

Бренд: LG Страницы: 38

Бренд: LG Страницы: 57

Бренд: LG Страницы: 68

Бренд: LG Страницы: 82

Бренд: LG Страницы: 106

Бренд: LG Страницы: 150

Бренд: LG Страницы: 176

Бренд: LG Страницы: 336

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды