Xantrex Freedom X 2000, Руководство пользователя

Страница: 10 / 92

Precautions When Placing the Unit
x Freedom X 2000 - 230V Owner's Guide
NOTES :
1. Mount and place the Freedom X 2000 - 230V Inverter unit
away from batteries in a well ventilated compartment.
2. Always have someone within range of your voice or close
enough to come to your aid when you work near a lead-acid
battery.
3. Always have plenty of fresh water and soap nearby in case
battery acid contacts skin, clothing, or eyes.
4. Keep battery terminals clean from corrosion. If battery acid
or corrosion deposit contacts skin or clothing, wash
immediately with soap and water. If battery acid or corrosion
deposit enters your eye, immediately flood it with running
cold water for at least 20 min and have someone within
range of your voice or close enough to get medical attention
immediately.
5. Use extra caution to reduce the risk of dropping a metal tool
on the battery. It could spark or short circuit the battery or
other electrical parts and could cause an explosion. Use
tools with insulated handles only.
6. Batteries can produce a short circuit current high enough to
weld a ring or metal bracelet or the like to the battery
terminal, causing a severe burn.
7. When removing a battery, always remove the negative
terminal from the battery first for systems with earthed
negative. If it is earthed positive, remove the positive
terminal first. Make sure all loads connected to the battery
and all accessories are off so you don’t cause an arc.
Precautions When Placing the
Unit
WARNING
FIRE HAZARD
n
Do not install the inverter or any part of its supplied wiring in
engine compartments.
n
For marine installation, always locate the inverter away from
the battery and mounted separately in a well-ventilated
compartment with adequate space.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
.
CAUTION
BURN HAZARD
Avoid touching the external surfaces - heatsink may be hot.
Failure to follow these instructions can result in injury or
equipment damage.