Xantrex Freedom Sequence, Руководство пользователя

Страница: 22 / 58

12 Freedom Sequence Intelligent Power Manager Owner’s Guide
Basic Configuration Settings
List of circuit configurable settings includes:
1.
Priority
– a numerical circuit priority designation from 1 to 10
1
.
Each circuit will have a unique designation.
2.
Load Shed
– can be set to
Disabled
or
Enabled
Figure 9 Freedom Sequence Circuit Configuration Screen
Enter Fun c Enter Fun c
FSPM 00: Status
L2 Amps
Batt Voltage
Circuit Status
Config
On 0.0A
12.8V
FSPM 00: Config
Mode
SHR BKR Mode
SHR BKR Rating
Circuit Config
[Operating]
[Auto]
[30.0A]
Enter Fun c
FSPM 00: Circuit Config
1 ACLoad1
1 Priority
1 Load Shed
2 ACLoad2
[1]
[Enabled]
FSPM 00: Circuit Config
1 ACLoad1
1 Priority
1 Load Shed
2 ACLoad2
2 Priority
2 Load Shed
3 ACLoad3
3 Priority
3 Load Shed
4 ACLoad4
4 Priority
4 Load Shed
5 ACLoad5
5 Priority
5 Load Shed
Cont
[1]
[Enabled]
[2]
[Enabled]
[3]
[Enabled]
[4]
[Enabled]
[5]
[Enabled]
FSPM 00: Circuit Config
6 ACLoad6
6 Priority
6 Load Shed
7 DCLoad1
7 Priority
7 Load Shed
8 DCLoad2
8 Priority
8 Load Shed
9 DCLoad3
9 Priority
9 Load Shed
10 DCLoad4
10 Priority
10 Load Shed
[6]
[Enabled]
[7]
[Enabled]
[8]
[Enabled]
[9]
[Enabled]
[10]
[Enabled]
Enter Fun c
FSPM 00: Config
Mode
SHR BKR Mode
SHR BKR Rating
Circuit Config
[Operating]
[Auto]
[30.0A]
Complete list of circuit configuration items.
To activate a specific configuration
setting, move through each item
using the Up and Down buttons (
3
).
When a selection is made, press the
Enter
button (
4
) to activate the
highlighted configuration setting.
To activate the circuit configuration
screen, scroll down (
5
) until
Circuit
Config
is highlighted then,
press
Enter
(
6
) to bring up the screen.
To activate a specific circuit
configuration setting, move through
each item using the Up and Down
buttons (
7
). When a selection is
made, press the
Enter
button (
8
) to
activate the highlighted circuit
configuration setting.
From the Device Status screen, scroll
down (
1
) until
Config
is highlighted
then, press
Enter
(
2
) to bring up the
basic Configuration screen.
1 2
3 4 5 6
7 8
To display the next set of circuit
configurations, scroll down until
Cont
is highlighted then, press
Enter
to bring
up the second screen.
NOTE
: Use the
Func
button to exit out
of each screen.
1.1 to 8 for the Freedom Sequence four-circuit model PN: 809-0913.
FSequence IPM Owners Guide.book Page 12 Thursday, October 6, 2011 3:33 PM