Xantrex FREEDOM HF 1000, Руководство по установке, Страница: 31 / 70

Basic Installation Procedures
975-0395-01-01 1–13
This guide for use by qualified installers only
Step 3: Mounting the Freedom HF
To mount the Freedom HF :
1. Remove the Freedom HF from its shipping container, verify that all
components are present, and record relevant product information on
“Information About Your System” on page WA–4 .
2. Select an appropriate mounting location and orientation. (See Figure
1-3 below.) To meet regulatory requirements, for use in on-land
applications, the Freedom HF must be mounted in one of the
following orientations:
• Under a horizontal surface (see 1)
• In a horizontal position on a vertical surface (see 2)
• On a horizontal surface (see 3)
3. Look for the mounting template and unfold. Tape it to the mounting
surface and pilot-drill the desired number of mounting holes. Remove
the template.
4. Fasten the Freedom HF to the mounting surface. If you are mounting
the unit on a wall or bulkhead, use #12 or #14 pan-head wood or sheet
metal screws to secure it to the framing behind the wall or bulkhead.
Alternatively, use nut inserts and 1/4-20 machine screws.
Note:
For marine installations, only this orientation is allowed,
due to the probability of moisture finding access into the
enclosure.
Figure 1-3 Approved Mounting Orientations
1
See page 1–31 for drip
shield installation on
Marine applications.
2
3
FreedomHF_IC_01-Installation.fm Page 13 Monday, December 24, 2007 9:47 AM