![background image](http://html1.mh-extra.com/html/xantrex/alm-rev-a/alm-rev-a_manual_3154827016.webp)
2.0 INSTALLATION
©2001 Xantrex Technology Inc.
P/N 975-0027-01-01 Rev A 09/01
12
Communication Cable
The ALM is supplied with a 25-foot, telephone-type, cable with RJ11 connectors
on each end.
NOTE: Longer cable lengths are available for purchase
from your Xantrex Dealer: part numbers TC/50 for 50 feet
(15.24 m) and TC/100 for 100 feet (30.48 m).
• Route the telephone-type cable through one of the knockouts fitted with a
strain relief (or conduit).
• Connect one end of the cable to the jack labeled J1 on the ALM circuit board.
• Connect the other end of the cable to the jack labeled AUX inside the inverter
(refer to the inverter’s operator’s manual for location).
• Reinstall the cover on the ALM using the two Phillips screws.
• Reinstall the inverter’s cover.
NOTE: Recheck all wiring before proceeding to the
Operation section of this manual.
Figure 2-7
J1 Control Signal Connection
J1 Connector
Communication
cable to inverter
Содержание ALM - REV A
