![background image](http://html1.mh-extra.com/html/xantech/590-10/590-10_installation-instructions-manual_3154831008.webp)
Page 8
Model 590-10
© 2002 Xantech Corporation
SOFTWARE INSTALLATION
The installation software for the Dragon Drop-IR system is included in the supplied CD ROM. Install the Dragon
Drop-IR™ Software onto your hard drive as follows:
Windows 95/98/NT/2000/ME/XP
1. Insert the DRAG460 beta CD into your CD-ROM drive. If your drive has been set for auto run, a ‘Xantech
Welcome’ menu will appear. If not, access your CD ROM with Windows Explorer and double click
"autorun.exe".
2. On the Welcome menu, click Install DD4 Software. Follow the on-screen instructions as the program installs.
It takes approximately one to three minutes to complete, depending on the speed of your machine.
NOTE:
For the convenience of the installer, the Dragon Drop-IR CD ROM contains a complete set of
Application Notes, the Xantech Product Catalog, Factory Learned IR Codes, web site browsers and important
notes. Read the Very Important Notes first, click on the desired menu item and follow the on-screen
instructions.
STARTING DRAGON DROP-IR
Windows 95/98/NT/2000/ME/XP
1. Installation creates a shortcut on the desktop. Double click on the 590-10 Shortcut or:
2. From START menu, choose Programs.
3. Select DRAG460 from the list and click on the DRAG460 Icon.
4. The program loads and opens to the Xantech Dragon Drop-IR opening screen.
SERIAL PORT SELECTION
When first launched, the Dragon Drop-IR software scans the serial ports and will display the available ports under
"Preferences" in the File menu. Unavailable ports will be grayed out. Com Port 1 would normally be used, but if it
is already in use, it will be necessary to use a different one. If your computer only has a USB connection, a USB
to Serial Adapter (including software) can be purchased at most computer stores and is available for purchase
from Xantech. (Also check with local Authorized Xantech Distributor).
Select the Com Port as follows:
1. Click Preferences (F2) from the File menu.
2. Click on an available port, then OK.
PROGRAMMING PROCEDURES
PLANNING THE SYSTEM
Before attempting any programming, plan the system configuration first. This should include the following:
a) Determine the brands and types of all IR-controlled components you expect to use.
CAUTION
: See caution card (included) for the latest information regarding code compatibility before finalizing
the system.
LEARNING IR COMMANDS
NOTE:
Before starting this section, palettes created in other versions of Dragon Drop-IR can be Copied and
Pasted to the PALETTE FOLDER in DRAG460 beta.
Содержание 590-10
Страница 15: ...Model 590 10 Page 15 2002 Xantech Corporation...