Xante PlateMaker 4, Руководство по установке

Страница: 18 / 20

1-18 Introduction and Installation bb
Printer Ports Overview
Your printer has standard parallel, 10/100BaseT Ethernet (EtherTalk, LPR, TCP/IP,
and IPP), and USB ports (fig. 1.30). These simultaneously active interfaces can receive
jobs from different operating environments without hardware switching.
+ +
USB
PARALLEL
ETHERNET
Fig. 1.30 Printer Ports
Selecting the Printer Interface
Connect to the printer appropriate interface for your host computer or network
environment.
With a parallel connection, the PC to printer distance for a PC without Ethernet
should be less than 10 ft. (3 m). With an Ethernet connection, you need a UTP
connection.
Required Equipment: Parallel
Use a bidirectional or IEEE 1284 parallel printer cable to connect your PC and printer
(fig. 1.31) via the parallel port. The cable’s printer end has a 36-pin male connector;
the computer end has a 25-pin male connector.
36-pin Connector
To Printer
25-pin Connector
To Host Computer
Fig. 1.31 Parallel Cable
See “Parallel Connection” in chapter 3 for details on connecting this cable to the
printer and your computer.