10-6 Troubleshooting
bb
____________________________________
3.
Check the pick up roller area for a jam. If found, remove the
media by pulling it in the direction of the arrow in figure 10.2.
MANUAL
READY
ON LINE
FORM
FEED
RESET
TEST
ENTER
MENU
TRAY
SELECT
®
Fig. 10.2 Remove Media from the Roller Area
4.
Check the fuser unit area for a jam. If found, use the following
procedure to remove the media.
a.
If any part of the media comes out of the fusing unit on
the inside toward the printer, pull the media out in the
direction of the arrow in figure 10.3.
MANUAL
READY
ON LINE
FORM
FEED
RESET
TEST
ENTER
MENU
TRAY
SELECT
®
Fig. 10.3 Remove Media from the Fuser Area
