_____________________________________ Troubleshooting 10-11
TONER LOW
The toner is running low. Try
redistributing toner in the current
cartridge or install a new toner cartridge.
WAITING
The printer is waiting to receive more
data on a job before printing.
WARMING UP
The printer is warming up and the fuser
unit has not reached optimum
temperature yet. Wait until READY/
IDLE appears in the display window
before sending a job to the printer.
Printer Service Messages
You may see one of the following messages occasionally which
indicates a mechanical issue requiring a service call. Be sure to make
a note of the message before calling.
SERVICE A
The fuser unit needs attention.
SERVICE B
The laser diode, scanning mirror, or
scanning motor needs attention.
SERVICE E
An engine part other than one covered
by SERVICE A or B needs attention.
Preliminary Troubleshooting
Preliminary troubleshooting covers both a general once over of the
printer and then specific checks depending on the environment,
Macintosh, PC, or Ethernet. Also, Ethernet troubleshooting is
covered in the Ethernet upgrade documentation.
